Using Instrument Functions
Using a Keyboard
Using a keyboard makes editing of file and directory names, or program
lines quick and easy. You can edit these items from the front panel of the
instrument using the front panel knob and the softkeys, however this process
is very tedious.
Following is an example procedure to use a keyboard and the Re-Save State
function to save an instrument state that you want to call "mixer".
1. Set up the instrument with the measurement parameters that you want
Press
4. Use the keyboard to backspace over the existing file name (don't worry,
5. Press (ENTER] on the keyboard (or the analyzer) and the current
instrument state will be saved to a file titled "mixer".
4 - 9 4
深圳市盛腾仪器仪表有限公司
to save. See "Saving and Recalling Measurement Results," earlier in this
chapter, for more information.
[
)
SAVE RECALL
instrument state.
the existing file will not be written over), and then use the keyboard to
type in mixer.
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.c