Using Instrument Functions
Using limit Testing
There may be times when you are interested in the shape of a measurement
trace, but not concerned with the absolute amplitude. For example,
Figure 4-16 shows limit lines created for tuning a filter to a particular shape.
If the shape is more important than the amplitude, you can make the limit
lines relative to the peak point of the trace using the reference tracking
function.
In this example, you would press (Ei@ Reference Trackilzg
measurement trace rather than set at an absolute amplitude.
For more information on reference tracking, see "Using Reference Tracking, n
later in this chapter.
4-41
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.c