Automating Measurements
Displaying Measurement Results
The analyzer displays measurement channel annotation above the graticule.
This annotation shows the measurement type, format, scale/div, and
reference level.
You may replace this annotation with your own text or eliminate the
measurement channel annotation completely. lb do so, use the following
command to enable user-defined annotation:
For example :
To specify the string to be displayed use the command:
l
For example:
To restore the default measurement channel annotation, use:
l
To turn the measurement channel annotation on or off press (jj)
l
these SCPI commands:
7-68
深圳市盛腾仪器仪表有限公司
DISPlay:ANNotation:CHANnell:USER
DISP:ANN:CHANl:USER:LABel '1: SuperNotch filter, test #3'
DISPlay:ANNotation:CHANnell:USER
Annotation Options Ideas Annot ON off or use
Tel:0755-83589391
ON
<STRING>
OFF
Fax:0755-83539691
Website: www.Sengt.c