Selecting the
Proper Line
Voltage
Select the proper line voltage with the LINE SELECT switch on the
rear panels of both the HP 16500A and the HP 16501A. Printed on the
switch is the line voltage required for that position. If you want to
change the selection, push the switch to the opposite side and the other
line voltage selection will then show on the switch.
Caution
Either the HP 16500A or the HP 16501A can be damaged if the LINE
VOLTAGE SELECT switch is not properly set to match the input
voltage.
Figure 1-3.
Selecting the proper line
voltage
HP 16500A/16501A
Setting Up the System
Getting Ready to Operate
1-5