4-15 BELT POSITION ADJUSTMENT
This adjustment is to prevent the belt wear which is caused by the belt contacting with the pulley flanges
excessively. The belt position needs to be confirmed after the Belt Tension Adjustment and adjusted if it
is necessary.
Remove the Covers in order.
1
1. I/S Cover
2. Right Top Cover
3. Maintenance Cover
4. Left Cover
5. Front Cover
6. Top Cover
Turn on the Sub Power SW while pressing [
2
[
] keys to enter the Service Mode.
[ADJUSTMENT ON THE DRIVE PULLEY SIDE]
3
Perform the Aging test for the belt.
Select [MOTOR MENU]> [AGING]> [SCAN], and press
[ENTER] key.
(Referential Time : 30min.)
LEFT
COVER
MAINTENANCE
COVER
FRONT COVER
], [
] and
4-56
TOP COVER
RIGHT TOP
I/S COVER
+
MENU
MENU
SERVICE MENU
SERVICE MENU
MOTOR MENU
[ ]
MOTOR MENU
AGING
[ ]
AGING
SCAN
[ ]
COVER