Roland VersaCAMM VP-540 Service Notes page 75

Remove the wiper and install the new one.
5
Make sure to fix the Wiper so that the rubber
side faces the front.
Use the tweezers to press the area shown in the figure
6
and engage the wiper on the hook.
Make sure to engage it on the hook. If the wiper
is not hooked, it may fall off during use.
Fix the I/S Cover, and press the [ENTER] key.
7
The Head Carriage moves back to the standby position
and the Head Cleaning starts automatically. When the
Head Cleaning finishes, the screen shown in the figure
appears.
MAINTENANCE
REPLACE WIPER
3-12
SCREW
I/S COVER
HOOK
ENTER