Roland VersaCAMM VP-540 Service Notes page 87

In [MOTOR MENU] > [SERVO LOCK] menu, select [S].
14
Move the Head Carriage left and right by hand and make
sure the value on the LCD changes depending on the
head position.
Press the [ENTER] key to excite the motor.
15
Check the Head Carriage can not be moved easily by
hand and the value on the LCD doesn't change.
Perform the AGING.
16
Go back to the [MOTOR MENU], and select [AGING] >
[SCAN] and press the [ENTER] key. Make sure the
machine performs AGING and then, finish it by pressing
[ENTER] key.
Do not load any media when performing
[AGING].
Clear the motor working hours.
17
Go back to the Service Menu, and select [HISTORY
MENU] > [MOTOR GROUP] > [MOTOR HOURS S] >
[CLEAR] and press the [ENTER] key. The motor working
hours will be reset to 0.
SERVICE MENU
MOTOR MENU
MOTOR MENU
SERVO LOCK
SERVO LOCK
S:
SERVO LOCK
S:
SERVO LOCK
S:*
SERVICE MENU
AGING
AGING
SCAN
SERVICE MENU
HISTORY MENU
HISTORY MENU
MOTOR GROUP
MOTOR HOURS S
MOTOR HOURS S
CLEAR
3-24
[ ] [ ]
[ ]
3
1688
[ ENTER ]
1688
[ ]
[ ]
[ ] [ ]
1653 hours
[ ]
[ENTER]