Roland VersaCAMM VP-540 Service Notes page 159

Press [MENU] key, and set [IP ADDRESS], [SUBNET
3
MASK] and [GATEWAY ADDR.].
Press [ ] and [ ] keys for moving between digits, and
[ ] and [ ] keys for selecting value. After setting an
address, press [ENTER] key to go next address setting.
When [GATEWAY ADDR.] is set, it returns to the waiting
mode for receiving the firmware by pressing [ENTER] key.
The setting made here is only temporary for
the firmware installation and it is not saved.
Start the Peck4 on PC.
4
[Peck4] screen is displayed, and click [Select Port]
button.
Select [Type3 ProIII etc.] from [Product].
5
Also, select [Via Network] and input IP
address of VP-540/300.
Click [OK] button.
WAITING
000.000.000.000
IP ADDRESS
192.168.000.100
SUBNET MASK
255.255.255.000
GATEWAY ADDR.
000.000.000.000
WAITING
192.168.000.100
4-18
MENU
[ ]
[ ]
[ ]