Head Position Adjustment 1 - Roland Color Camm Pro PC-60 Service Notes

4-11 HEAD POSITION ADJUSTMENT 1

HEAD POSITION ADJUSTMENT 1 is designed to ensure the printing quality by aligning the HEAD to
land straight down on the PLATEN. It is necessary to avoid BLURRY PRINT, BROKEN RIBBON and
TWISTED RIBBON.
This adjustment must be performed after replacement of the HEAD CARRIAGE.
Remove the RAIL COVER.
1
Loosen ADJUSTING SCREW A and SCREW B shown in
2
the figure.
Loosen the SCREW C shown in the figure.
3
ADJUSTING SCREW A
SCREW B
SCREW C
4 Adjustment
4
61