Adjusting The Sensor's Position; Adjusting The Positioning Of The Take-Up Unit Sensor - Roland Hi-Fi EXPRESS FP-740 Setup Manual

6. Adjusting the Sensor's Position

Adjusting the Positioning of the Take-up Unit Sensor

In order to take up media during printing using the take-up unit, the location of the sensor must be adjusted.
Procedure
Turn on the main power switch of the take-up unit.
Two LEDs (green and red) light up.
Sensor
Screw
Screw
Sensor detection area
Media that is fed out here is taken up automatically.
Rear
Front
Printer
Stand
32
LED
Screw
LED goes dark
Screw
Sensor
Detection
area
POWER
ON
AUTO
OFF BACKWARD
OFF
FORWARD
Loosen the screw, and adjust the angle of the sensor so
that it is aligned with the mirror.
Tighten the adjustment screw securely at the angle where
the red LED has gone dark.
Mirror
MANUAL
BACKWARD
FORWARD
Main power switch