Roland VersaCAMM VP-540 Service Notes page 172

Select [DT1, Low], [DT3, Low],
22
[DT1, HIGH] and [DT3, HIGH] in the
[HEAD ADJUST] menu and enter
the parameters checked at step 21
with [ ] and [ ] keys.
Press [ENTER] key to save the
settings.
Parameters can be
e n t e r e d w i t h a n
increment of 1/2.
Fix the Damper Plate.
23
Make sure to press the Damper Plate
downward lightly when fixing it.
If you press the Damper Plate strongly, the
Damper may be damaged.
* Fix the screws at the lower end of the long
screw hole.
<VP-540>
<VP-300>
BI-DIR.DEFAULT
TEST PRINT
BI-DIR.DEFAULT H1
DT1, Low
BI-DIR.DEFAULT H1
DT3, Low
BI-DIR.DEFAULT H1
DT1, High
BI-DIR.DEFAULT H1
DT3, High
*VP-540 only
<VP-540>
DAMPER
PLATE
<VP-300>
DAMPER
PLATE
4-31
H2 H3 H4
2 1 3 2
H2 H3 H4
2 1 3 2
H2 H3 H4
2 1 3 2
H2 H3 H4
2 1 3 2