Head Replacement - Roland VersaCAMM VP-540 Service Notes

3-1 HEAD REPLACEMENT

Revised 1
VP-540/300 support the new head only. The parts number of the new head is as follows.
Parts No. : 1000002201
Parts name : ASSY,HEAD INKJET SOL XC-540
The number written on the back side of the Printhead Board is the way for identifying whether it is a new or
current Head."R4CJ520" is written on the new head.
Turn on the sub power while pressing the left, right and
1
down keys to enter the Service Mode.
Select [SERVICE MENU] > [SUB MENU] > [PUMP
2
UP], and remove ink by following the sequence.
In [PRINT MENU] > [HEAD RANK] menu, select the
3
head No. of the head that you are going to replace and
input the Head Rank written on the new head.
Input the Head Rank by selecting the digit with the left
and right keys, and changing the parameters with the up
and down keys.
Press the [ENTER] key to save the settings.
* The head at the left end is [HEAD1], and [HEAD2] to
[HEAD4] in order to the right.
Make sure to input the Head Rank before
replacing the head, because the sticker which
the head rank is written on will be hidden once
the head is installed.
R4CJ520
MENU
SERVICE MENU
SERVICE MENU
SUB MENU
SUB MENU
PUMP UP
CHECK
REMOVE SOL CRT.
PUMPING-UP...
>>>
SERVICE MENU
PRINT MENU
[
PRINT MENU
HEAD RANK
[
HEAD RANK
HEAD 1
[
HEAD RANK 1
1234567 (1/5)
[ENTER]
3-4
+
MENU
[ ] [ ]
[ ]
DRAIN BOTTLE
[ENTER]
1234
HEAD RANK
5CY2F2F
]
]
]