Belt Position Adjustment - Roland VersaCamm VS-640i Service Notes

4-14 BELT POSITION ADJUSTMENT

This adjustment is to prevent the belt wear which is caused by the belt contacting with the pulley Flanges exces-
sively. The belt position needs to be confi rmed after the Belt Tension Adjustment and adjusted if it is necessary.
Remove the Covers in order.
1
1. Right Cover
2. Left Cover
3. Front Cover
4. Front Rail Cover
5. Top Cover
6. Right Top Cover
7. Chassis Cover
Turn on the Sub Power SW while pressing [
2
[ ] keys to enter the Service Mode.
[ADJUSTMENT ON THE DRIVE PULLEY SIDE]
3
Perform the Aging test for the belt.
Select [MOTOR MENU]>[AGING]>[SCAN], and press
[ENTER] key.
(Referential Time : 30min.)
Left Cover
Front Cover
], [ ] and
4-50
Top Cover
Front Rail Cover
Right Top Cover
Right Cover
+
MENU
MENU
SERVICE MENU
SERVICE MENU
MOTOR MENU
[ ]
MOTOR MENU
AGING
[ ]
AGING
SCAN
[ ]
Chassis Cover