Tool Pressure Adjustment - Roland VersaCAMM VP-540 Service Notes

4-13 TOOL PRESSURE ADJUSTMENT (Referential Time : 15min)
This adjustment is to correct the tool pressure during cutting.
Before this adjustment, it is necessary to perform [4-12 TOOL HEIGHT ADJUSTMENT].
Install the White Dummy Pen (ST-006) to the Tool
1
Carriage.
Move the Pinch Rollers at
2
the positions as shown in
the figure, and lower them.
Remove the Covers in order.
3
1. I/S Cover
2. Maintenance Cover
3. Left Cover
4. Front Cover
5. Top Cover
VP-540
VP-300
LEFT
COVER
MAINTENANCE
COVER
4-50
WHITE DUMMY PEN
PINCH ROLLER
GRIT ROLLER
TOP COVER
FRONT COVER
I/S COVER