Motor Error - Roland VersaCAMM VP-540 Service Notes

6-10 MOTOR ERROR

NO CHECKING POINT
1
Media Jamming
Back tension of media is
2
too high
There is a dirt in teeth of
3
Drive Gear
4
Broken/life of the Motor
5
Broken Servo Board
Power Supply for Motor is
6
broken
ERROR DESCRIPTION
SCAN MOTOR ERROR
CODE : 0000 0000
Error detected as a result
MEANING
No.
Feed Motor Deviation Error
(The order from the CPU does not match the
0001
feedback of the Feed Motor.)
Feed Motor Overcurrent Error 1
0004 (Big load is put on the motor movement
instantaneously.)
Feed Motor Overcurrent Error 2
(A little load is put on the motor movement for
0008
a long time.)
0001 and 0004 occurred at the same time.
0005
0001 and 0008 occurred at the same time.
0009
Scan Motor Deviation Error
(The order from the CPU does not match the
0010
feedback of the Scan Motor.)
Scan Motor Overcurrent Error 1
(Big load is put on the motor movement
0040
instantaneously.)
Scan Motor Overcurrent Error 2
(A little load is put on the motor movement for
0080
a long time.)
0010 and 0040 occurred at the same time.
0050
0010 and 0080 occurred at the same time.
0090
ACTION
Remove cause of
Media Jam
Use appropriate media
Clean Drive Gear
[3-5 CARRIAGE MOTOR
Motor replacement
REPLACEMENT]
Servo Board replacement
Replace the switching [3-9 BOARDS
power supply REPLACEMENT]
Error detected at first
< External factors >
1. Media Jamming
2. Carriage is moved by hands.
3. Carriage runs into a thing/hand.
4. Media is stuck because it is caught by the paper pipe.
5. Media is pulled forcedly.
6. Loaded Media is too heavy.
< Machine factors >
1. The grease lubrication of the motor gear is not enough.
2. Motor is broken/Life.
3. Servo Board is broken.
4. Tool Carriage fixation to the belt is loose.
REFERENCE
When using hard-to-unroll or too heavy media, Motor Error
occurs due to the too much load for feeding the media.
When the Drive Gear has some dirt on its teeth and cannot
rotate, Motor Error occurs.
When the Motor is broken or reaches its life, the Motor cannot
follow the order from the CPU and it results in a Motor Error.
When the Motor Driver is broken, the power supply voltage for
the motor is not supplied and the motor cannot move. It
results in a Motor Error.
When the Power Supply voltage for the Motor is not supplied,
the Motor cannot move and it results in a Motor Error.
6-8
OUTLINE
CAUSE