Key Combinations
Function for Service
Service Mode
F/W Upgrade Mode
F/W Installation Mode for
a brand-new Main Board
System Parameter
Initialize
Limit Position/Cut Down
Position Initialize
Service Report
Function for Users
Language/Unit Selection
Combination Key Selection
+
+
+
ENTER
+
ENTER
+
+
Combination Key Selection
+
MENU
4-14
Comments
Press [MENU] and [
] to enter Service
Menu.
[UPDATE FIRMWARE?] will be
displayed.
Press [ENTER] to upgrade F/W.
Use this when the Main Board is
replaced.
[SUM-ERROR] will be displayed.
Press [ENTER] to upgrade F/W.
All parameters will be initialized.
Press [ENTER] to start initialize.
Press [ENTER] to initialize Limit
Position.
Then set up Cut Down Position.
Service Report will be printed.
It is the same as the Service Report in
the Service Menu.
Comments
Press[
] and [
] to select
Language/Unit.