Cleaning The Parts Other Than The Print Heads; Cleaning Using The Cleaning Kit; Temperature And Humidity; Transporting The Unit - Roland VersaCAMM VP-540 Service Notes

Cleaning the parts other than the print heads

- Pinch Rollers
- Grit Rollers
- Platen
!! IMPORTANT !!
Never use gasoline, alcohol, thinner, or any other flammable materials.

Cleaning using the cleaning kit

!! IMPORTANT !!
This is very important work for maintaining the heads in good condition and must be done periodically.
Replacing the wipers
Replacing the blade
Replacing the separating knife
7
Explain the following items referring to the Setup Guide.

Temperature and humidity

Specified temperature and humidity must be maintained even while not in use. When the temperature is
too high, the alteration of ink may damage the machine. And, when it is too low, frozen ink may damage
the print heads.
While in use: Temperature 20 to 32
While not in use: Temperature 5 to 40
When not in use for a prolonged period

Transporting the unit

When transporting the unit, head cleaning is required and you need 2 cleaning cartridges for it.
!! IMPORTANT !!
Fill ink within one week after transporting. If the machine is left without ink, the nozzles on the heads may
get clogged.
Others
Explain to refer to the User's Manual when a error message is displayed. And also explain to switch off and
on the machine and check what happens before calling for inquiry when [SERVICE CALL] is displayed,
since it occasionally solves the problem just by restarting.
Explain the procedure of capping the print heads referring to the User's Manual [5-5 The Print Heads
Stopped Moving]. When the print carriage does not return to the standby position, capping needs to be
done manually by user.
, Humidity 35 to 80% (Non-condensing)
C
, Humidity 20 to 80% (Non-condensing)
C
7-10