Holder Cable Sheet Replacement - Roland VersaCAMM VP-540 Service Notes

3-16 HOLDER CABLE SHEET REPLACEMENT

Turn on the sub power while pressing the left, right and
1
down keys to enter the Service Mode.
Select [SERVICE MENU] > [SUB MENU] > [PUMP UP],
2
and remove ink by following the sequence.
Turn off the sub power, and then turn off the main power.
3
Remove the following covers.
4
I/S Cover
Maintenance Cover
Left Side Cover
Front Cover
Top Cover
Right Top Cover
Revised 2
MAIN POWER SW
LEFT SIDE COVER
TOP COVER
MAINTENANCE COVER
3-72
+
MENU
MENU
SERVICE MENU
SERVICE MENU
SUB MENU
[ ] [ ]
SUB MENU
PUMP UP
[ ]
CHECK
DRAIN BOTTLE
[ENTER]
REMOVE SOL CRT.
1234
PUMPING-UP...
>>>
RIGHT TOP COVER
FRONT COVER
I/S COVER