Roland VersaCAMM VP-540 Service Notes page 204

Confirm that [START] is selected, and press [ENTER] key
4
to turn on the Take-up Unit.
[START] or [STOP] can be selected with
[ ] and [
The current setting is displayed on the left and
the new setting is diplayed on the right.
Set the AUTO switch of the Take-up Unit to either
5
FORWARD or BACKWARD.
Move the Dancer Roller up and down by hand, and confirm
6
that the drive part rotates.
The operation status of Take-up Unit can be
confirmed also on the LCD. [ * ] is diplayed on
the right side of upper LCD while driving, and
not displayed while not driving.
TU
START
Select [STOP] with [
7
[ENTER] key.
] keys.
*
START
] and [ ] keys, and press
TU
START
Drive Part
DANCER ROLLER
TU
START
4-63
START
[ ]
STOP
[ ]