Grit Encoder Replacement - Roland VersaCAMM VP-540 Service Notes

3-13 GRIT ENCODER REPLACEMENT

Turn off the sub power, and then turn off the main power.
1
Remove the following covers.
2
Maintenance Cover
Left Side Cover
Left Cover
Remove the screw as shown in the figure to remove the
3
Grit Encoder Board together with the stay.
Remove the 3 screws as shown in the figure to remove
4
Grit Encoder Stopper.
MAIN POWER SW
< Rear View >
LEFT COVER
LEFT SIDE COVER
< Left Side >
GRIT
ENCODER
BOARD
GRIT ENCODER STOPPER
3-67
MAINTENANCE COVER
SCREW
STAY
SCREW