Roland VersaCAMM VP-540 Service Notes page 95

Check the Grit Encoder.
27
Go back to the [MOTOR MENU], and select [G-ENC.
CHECK] and press the [ENTER] key. Make sure the Grit
Encoder functions correctly by confirming the display to
show [G-ENC. CHECK COMPLETED].
In case that [G-ENC. CHECK FAILED] appears, check
the followings.
1. Grit Encoder is fixed correctly.
2. Feed Motor is fixed correctly.
3. There are no scratches or fingerprints.
Perform AGING.
30
Go back to the [MOTOR MENU], and select [AGING] >
[FEED] and press the [ENTER] key. Make sure the
machine performs AGING and then, finish it by pressing
[ENTER] key.
Do not load any media when performing
[AGING].
Clear the motor working hours.
31
Go back to the Service Menu, and select [HISTORY
MENU] > [MOTOR GROUP] > [MOTOR HOURS F] >
[CLEAR] and press the [ENTER] key. The motor working
hours will be reset to 0.
SERVICE MENU
MOTOR MENU
MOTOR MENU
G-ENC. CHECK
M-ENC:
G-ENC:
G-ENC. CHECK
SERVICE MENU
MOTOR MENU
MOTOR MENU
AGING
AGING
FEED
SERVICE MENU
HITORY MENU
HITORY MENU
MOTOR GROUP
MOTOR HOURS F
MOTOR HOURS F
CLEAR
3-32
[ ] [ ]
[ENTER]
6654
6653
COMPLETED
G-ENC. CHECK
FAILED
[ ]
[ ] [ ]
[ ]
[ ] [
]
1653 hours
[ ]
[ ENTER ]