Roland VersaCAMM VP-540 Service Notes page 82

Connect the Crop Mark Sensor, Pinch Roller Sensor and
13
Solenoid wirings.
Perform the following adjustments and settings.
14
1. [4-5 LIMIT POSITION & CUT DOWN POSITION INITIALIZE]
2. [4-7 FLUSHING POSITION ADJUSTMENT]
Revised 1
3. [4-12 TOOL HEIGHT ADJUSTMENT]
4. [4-13 TOOL PRESSURE ADJUSTMENT]
5. [4-8 CROP MARK SENSOR ADJUSTMENT]
6. [4-9 CROP-CUT ADJUSTMENT]
7. [4-10 PRINT / CUT POSITION ADJUSTMENT]
CROP MARK SENSOR
PINCH ROLLER SENSOR
3-19
SOLENOID