Roland VersaCAMM VP-540 Service Notes page 146

SERVICE MENU SUB MENU
SUB MENU
SERIAL NO.
SUB MENU
CHANGE INKTYPE
SUB MENU
FILL INK
SUB MENU
PUMP UP
SUB MENU
HEAD REPLACE
SUB MENU
HEAD WASH
SUB MENU
PERIODIC CL.
SUB MENU
FAN CHECK
SUB MENU
TU CHECK
SERIAL NO.
ZS00000
CHANGE INKTYPE
MAX 4 MAX 4
This is for changing the Ink Type. Different from the process in the User Menu,
operations such as Head Wash and Fill Ink are not included.
This menu is used as a correction purpose when a wrong-type ink is selected.
When the ink type is changed, Ink System is initialized internally and then it exits
the menu and Setup is canceled.
CHECK
DRAIN BOTTLE
When ink is not filled
SELECT INK TYPE
E-SOL Max4COLOR
CHECK
DRAIN BOTTLE
CHECK
DRAIN BOTTLE
SET SOLCL-LIQUID FILLING INK...
1234
Goes next, when cleaning cartridge is set
CHECK
DRAIN BOTTLE
CHECK
DRAIN BOTTLE
WASHING HEAD...
Goes next,
when cleaning cartridge is removed
PERIODIC CL.
LIGHT LIGHT
FAN CHECK
VACUUM FAN
TU CHECK
TU
This menu is for entering the Serial No. of the machine in 7 digits. The cursor moves
between digits with [ ] and [ ] keys. The parameter can be changed with [
[ ] keys.
NOW PROCESSING..
BUSY LED flashes
INSTALL
SET SOL CRT.
DRAIN BOTTLE
1234
Goes next, when cartridge is set
CHECK
FILLING INK...
DRAIN BOTTLE
Goes next, when completed
REMOVE SOL CRT.
1234
Goes next, when cartridge is removed
Cleaning and ink filling for after head replacement.
REMOVE SOL CL
1234
Goes next, when cleaning cartridge is removed
SET SOL CRT.
FILLING INK...
1234
Goes next, when cartridge is set
REMOVE SOL CRT.
1234
Goes next, when cartridge is removed
REMOVE SOL CL
WASHING HEAD...
1234
Goes next, when completed
This is for selecting a cleaning type for [PERIODIC CL.] function.
Options: WIPE / LIGHT / NORMAL / MEDIUM
WIPE: Wiping and Flushing only
LIGHT: Wiping and light evacuation (lighter than regular cleaning) only
NORMAL/MEDIUM: The regular NORMAL/MEDIUM cleaning
This is for checking the operation of fans. Press [ENTER] key for ON/OFF of fans.
Fan turns off automatically as exiting this menu.
TU
START STOP
When Take-Up unit is not connected
TU IS
NOT CONNECTED
4-5
] and
To Setup View
Ink Type Max 4 : ECO-SOL Max CMYK
PIG 4 : PIG CMYK
UNKNOWN: Ink Type not specified
PUMPING-UP...
Goes next, when completed
FILLING INK...
CHECK
DRAIN BOTTLE
SET SOLCL-LIQUID
1234
Goes next, when
cleaning cartridge is set
Default: NORMAL
Selecting [START], the operation of TU can be
confirmed by manually moving the dancer roller of TU.
The driving status of TU is indicated on the upper right
of the display. It shows [ ] while driving and it is blank
*
when not driving. Also selecting [STOP], make sure TU
does not drive when the dancer roller is moved. Once
back out this menu, the initial status here is always
[START] despite what is selected before.