Other Factory Mode
ENTER
INITIALIZE ALL
SYS.PARAMETER
SELECT MODEL
VP-540
INITIALIZATION
LANGUAGE / UNIT
SELECTION
+
MENU
Roland DG Corp.
VP-540
MENU LANGUAGE
ENGLISH
[ ]
LENGTH UNIT
mm
>
INCH
[ ]
TEMP. UNIT
C
>
F
SYSTEM PARAMETER INITIALIZE
+
[ ]
[ ]
COMPLETED
SERVICE REPORT
All parameters will be initialized. Turn on the Sub Power SW
while pressing [
], [
machine in system parameter initialize mode.
Select the model by pressing [
Press [ENTER] key to initialize the system parameter or press
the Sub Power SW more than 1 second to cancel it. The machine
turns off automatically when the initialization is completed. All
the parameters are reset to the default.
It is necessary to initialize the limit position after this initialization.
[SERVICE CALL 0101] occurs without initializing the limit
position.
SERVICE REPORT PRINTING
+
4-13
] and [ENTER] keys to start the
] and [
] keys.
Turn on the Sub Power SW while
pressing [
] key to start the machine
in the service report printing mode.
The service report will be printed
automatically when the media is set
up. It prints with Black ink.
(Printing Area : W270 L360mm)
The machine turns to be the normal
mode after printing.