Roland VersaCAMM VP-540 Service Notes page 199

Press [ENTER] key to restart Aging.
8
Adjust the belt position turning the Adjustment Screw as
9
follows.
Belt leans to the front side of the machine
-Turn the screw carefully in CW (loosening).
The work space is narrow. Be careful and try
not to touch the driving pulley and belt.
Belt leans to the rear side of the machine
-Turn the screw carefully in CCW (tightening).
Tighten the 2 Fixing Screws for the bottom of the screw
10
head to slightly contact with the Stay.
Make sure not to tighten the screws too tight.
It may move the fixed Drive Pulley Holder
accidentally.
AGING
SCAN
Touching the frange on the FRONT side of machine
ADJUSTMENT SCREW
Touching the frange on the REAR side of machine
ADJUSTMENT SCREW
FIXING
SCREWs
4-58
[ ]