How To Upgrade Firmware To The Network Controller - Roland VersaCAMM VP-540 Service Notes

4-3 HOW TO UPGRADE FIRMWARE OF THE NETWORK CONTROLLER
Turn on the Main Power SW and Sub Power SW, then
1
press [MENU] key.
Select [SYSTEM INFO.]> [NETWORK]> [IP ADDRESS]
and set the IP address.
Close the RIP when it is running.
Open a browser and enter the IP address which is set at
2
step 1.
Current firmware version appears.
Internet Explorer is recommended.
Click [Update].
3
( Referential Time : 5min.)
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
NETWORK
IP ADDRESS
IP ADDRESS
192.168.000.100
4-22
MENU
[ ]
[ ]
[ ]
[ ]
[ ]