Roland VersaCAMM VP-540 Service Notes page 71

Fix the 2 new Ink Dampers to the head.
15
Make sure to replace the Dampers when
replacing the head.
Do not hold both sides of the Ink Damper
tight. It could break.
Fix the Damper Plate.
16
Make sure not to press it to the Dampers.
Dampers could break.
* Fix the screws at the lower end of the long
screw hole.
< VP-540 >
< VP-300 >
Turn on the main power, and then turn on the sub power
17
while pressing the left, right and down keys to enter the
Service Mode.
INK
DAMPER
SCREW
INK
DAMPER
<VP-540>
INK
DAMPER
<VP-300>
MENU
SERVICE MENU
3-8
SCREW
DAMPER PLATE
HEAD BOARD COVER
SCREW
DAMPER PLATE
HEAD BOARD COVER
+
MENU