Installing a Blade / Adjustment of a Blade
Installing a Blade
CAUTION
NOTICE
Be sure to support the tool mounting screw from below when installing the blade holder. If installed without
supporting the screw in this way, the blade tip may strike the blade protector, damaging the blade or blade
protector and impairing cutting quality.
Procedure
Blade holder
Blade
Insert until the collar is
flush with the surface.
Do not touch the tip of the blade with your fingers.
Doing so may result in injury, and the cutting performance of the blade will be
impaired.
Pin
Screw.
Insert the pin into the blade holder.
Insert the blade.
Tighten the cap all the way.
Support the screw from below and insert
the blade holder.
If installed without supporting the screw in this
way, the blade tip may strike the blade protector,
damaging the blade or blade protector and impair-
ing cutting quality.
2
35