Connecting The Power Cable - Roland CAMM-1 GS-24 Installation Manual

Connecting the Power Cable

WARNING Connect to an electrical outlet that complies with this machine's rat-
ings (for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
WARNING Perform this work with all power switches left switched off.
Failure to do so may result in sudden movement of the machine, which may cause injury.
Do not connect to the computer yet.
Important
Use a USB cable to connect the machine to a computer. Do not connect the machine to the computer yet.
The machine must be connected to the computer after the Windows driver has been installed. Make sure to
connect according to the instructions on the "Startup Guide (web page)" ( P. E-17 "Installing Software and
Manual"). If the machine is connected before the driver has been installed, driver installation may fail, and it
may not be possible to use the machine.
1. Installation
E-15