Cut Ribbon Cable Replacement - Roland VersaCamm VS-640i Service Notes

3-19 CUT RIBBON CABLE REPLACEMENT

Remove the following covers in order.
1
1. Right Cover
2. Right Top Cover
3. Chassis Cover
4. Front Cover
5. Front Rail Cover
6. Left Cover
7. Top Cover
Separate the Tool Carriage from the Head Carriage.
2
Remove the Tool Carriage Cover.
3
Remove the four rivets shown in the figure to remove the
4
Tool Carriage Board Cover.
Left Cover
Front Rail Cover
Front Cover
Tool Carriage Cover
Tool Carriage Board Cover
3-87
Top Cover
Chassis Cover
Right Top Cover
Right Cover