Step 2: Installing The Media Holder - Roland versaArt RE-640 Setup Manual

Step 2: Installing the Media Holder

Procedure

Place the shafts on the stand.

Pass the left media holder onto the shaft.
Pass it through from the right edge (as seen from the back of the machine).
w
Move the left media holder to the left side of the shafts and attach it using the retain-
ing screw.
Only light tightening is necessary for the retaining screw.
Retaining
screw
Insert the front shaft into
the media holder.
T i g h t e n
loosely.
Shafts
Place the media holder hanged
on the rear shaft.
3. Assembling and Installing
25