Web Interface: Enable Routing For The Switch; Enable Routing For Ports On The Switch - NETGEAR M4200 Software Administration Manual

Web Interface: Enable Routing for the Switch

1. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
2. For Routing Mode, select the Enable radio button.
3. Click Apply to save the settings.

Enable Routing for Ports on the Switch

Use the following commands or the web interface to enable routing for ports on the switch.
The default link-level encapsulation format is Ethernet. Configure the IP addresses and
subnet masks for the ports. Network-directed broadcast frames will be dropped. The
maximum transmission unit (MTU) size is 1500 bytes.
Managed Switches
Port Routing
74