Configure Mvr In Dynamic Mode; Cli: Configure Mvr In Dynamic Mode - NETGEAR M4200 Software Administration Manual

A screen similar to the following displays.
b. In the Group IP list, select 224.1.2.3.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 1, 5, and 7. (Port 9 is already in MVR group
224.1.2.3 because it is configured as the source port.)
e. Click Apply to save the settings.

Configure MVR in Dynamic Mode

CLI: Configure MVR in Dynamic Mode

In dynamic mode, the MVR switch learns existing multicast groups by snooping the IGMP
queries from router on source ports and forwarding the IGMP reports from the hosts to the
IGMP router on the Multicast VLAN (with appropriate translation of the VLAN ID).
1. Create MVLAN, VLAN1, VLAN2, and VLAN3.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 999,1001, 1002, 1003
(Netgear Switch) (Vlan)#vlan name 999 mVlan
(Netgear Switch) (Vlan)#vlan name 1001 Vlan1
(Netgear Switch) (Vlan)#vlan name 1002 Vlan2
(Netgear Switch) (Vlan)#vlan name 1003 Vlan3
(Netgear Switch) (Vlan)#exit
Managed Switches
MVR
297