Show Igmp Querier Status; Cli: Show Igmp Querier Status - NETGEAR M4200 Software Administration Manual

A screen similar to the following displays.
b. In the VLAN ID field, enter 1.
5. Click Add.

Show IGMP Querier Status

The example is shown as CLI commands and as a web interface procedure.

CLI: Show IGMP Querier Status

To see the IGMP querier status, use the following command.
(Netgear Switch) #show igmpsnooping querier vlan 1
VLAN 1 : IGMP Snooping querier status
----------------------------------------------
IGMP Snooping Querier VLAN Mode................ Enable
Querier Election Participate Mode.............. Disable
Querier VLAN Address........................... 0.0.0.0
Operational State.............................. Disabled
Operational version............................ 2
The command shows that the IGMP admin mode is Active. The mode is controlled by the
set igmp command. If the mode is inactive, no query packet is sent.
Managed Switches
IGMP Snooping and Querier
287