NETGEAR M4200 Software Administration Manual page 486

A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
5. Create the DHCPv6 pool.
a. Select System > Services > DHCP Server > DHCPv6 Pool Configuration.
A screen similar to the following displays.
b. In the Pool Name list, select Create.
c. In the Pool Name field, enter ipv6_server.
d. Click Apply to save the settings.
6. Configure the prefix for the DHCPv6 pool.
a. Select System > Services > DHCPv6 Prefix Delegation Configuration > DHCPv6
Prefix Delegation Configuration.
Managed Switches
DHCPv6 Server
486