NETGEAR M4200 Software Administration Manual page 360

2. Verify that TACACS authentication is set up for Telnet users.
(Netgear Switch) #show authentication methods
Login Authentication Method Lists
---------------------------------
defaultList :
networkList :
Enable Authentication Method Lists
----------------------------------
enableList :
enableNetList :
Line Login Method List
------- -----------------
Console defaultList
Telnet networkList
SSH networkList
HTTPS :local
HTTP :local
DOT1X :
3. Create an EXEC authorization list and configure TACACS as the authorization.
(Netgear Switch)(Config)#aaa authorization exec "execList" tacacs
4. Configure EXEC authorization for Telnet.
(Netgear Switch)(Config)#line telnet
(Netgear Switch)(Config-telnet)#authorization exec execList
(Netgear Switch)(Config-telnet)#exit
Managed Switches
local
tacacs
enable none
enable none
Enable Method List
------------------
enableList
enableList
enableList
Security Management
360