NETGEAR M4200 Software Administration Manual page 512

3. Verify the PVSTP status.
(Netgear Switch) #show spanning-tree vlan 1002
VLAN 1002
Spanning-tree enabled protocol pvst
RootID Priority
Address
Cost
Port
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec
BridgeID Priority
Address
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300 sec
Interface Role
--------- ----------
1/0/1 Designated
1/0/2 Designated
4. Enable the FastUplink and FastBackbone features to speed up the selection of a new root
and indirect ports, respectively.
(Netgear Switch) (Config)#spanning-tree uplinkfast
(Netgear Switch) (Config)#spanning-tree backbonefast
Managed Switches
33770
6C:B0:CE:19:AE:3D
0
This switch is the root
33770 (priority 32768 sys-id-ext 1002)
6C:B0:CE:19:AE:3D
Sts Cost
------------- -----------
Forwarding 20000
Forwarding 20000
STP
512
Prio.Nbr
--------
128.1
128.