NETGEAR M4200 Software Administration Manual page 363

5. Configure EXEC authorization for Telnet.
(Netgear Switch) (Config)#line telnet
(Netgear Switch) (Config-telnet)# authorization exec execList
(Netgear Switch) (Config-telnet)#exit
6. Verify that EXEC authorization is set up for Telnet.
(Netgear Switch) #show authorization methods
Command Authorization Method Lists
-------------------------------------
dfltCmdAuthList
Line Command Method List
--------- ---------------------
Console dfltCmdAuthList
Telnet dfltCmdAuthList
SSH dfltCmdAuthList
Exec Authorization Method Lists
-------------------------------------
dfltExecAuthList
execList
Line Exec Method List
--------- ---------------------
Console dfltExecAuthList
Telnet execList
SSH dfltExecAuthList
7. Using Linux on the RADIUS server, configure a user named eric as an administrator in the
user file for FreeRADIUS.
eric Cleartext-Password := "testing"
Service-Type = Administrative-User,
Note: Instead, you can also configure a user named eric with Cisco-AVPair
"shell:priv-lvl=15".
eric Cleartext-Password := "testing"
Service-Type = Login-User,
Cisco-AVPair = "shell:priv-lvl=15
Managed Switches
: none
: none
: radius
Security Management
363