NETGEAR M4200 Software Administration Manual page 361

5. Verify that EXEC authorization is set up for Telnet.
(Netgear Switch) #show authorization methods
Command Authorization Method Lists
-------------------------------------
dfltCmdAuthList
commandlist
Line Command Method List
--------- ---------------------
Console dfltCmdAuthList
Telnet dfltCmdAuthList
SSH dfltCmdAuthList
Exec Authorization Method Lists
-------------------------------------
dfltExecAuthList
execList
Line Exec Method List
--------- ---------------------
Console dfltExecAuthList
Telnet execList
SSH dfltExecAuthList
6. Using Linux on the TACACS server, configure an encryption key for the TACACS server in
the file tac_plus.conf.
key = "12345678"
accounting syslog;
accounting file = /var/log/tac_plus/tac_plus.acct
7. Using Linux on the TACACS server, allow a user named eric to access privileged EXEC
mode directly as defined in the file tac_plus.conf.
user = eric {
# member = network_user {
default service = permit
login = des qbVVseTcbtzS2
service = exec {
priv-lvl = 15
}
Managed Switches
: none
: tacacs
: none
: tacacs
Security Management
361