NETGEAR M4200 Software Administration Manual page 132

A screen similar to the following displays.
b. Under OSPF Configuration, in the Router ID field, enter 2.2.2.2.
c. Click Apply to save the settings.
5. Enable RIP on port 1/0/11.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the Interface field, select 1/0/11.
• For RIP Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
6. Enable OSPF on port 1/0/15.
a. Select Routing > OSPF > Advanced > Interface Configuration.
Managed Switches
OSPF
132