NETGEAR M4200 Software Administration Manual page 569

A screen similar to the following displays.
b. In the Interface list, select 1/0/11.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7. Enable PIM-DM globally.
a. Select Routing > Multicast > PIM > Global Configuration.
A screen similar to the following displays.
b. For PIM Protocol Type, select the PIM-DM radio button.
Managed Switches
PIM
569