NETGEAR M4200 Software Administration Manual page 593

M4200 and m4300 series prosafe managed switches

Hide thumbs Also See for M4200:

Table of Contents

A screen similar to the following displays.

b. Scroll down and select the Port 1/0/21 check box.

Now 1/0/21 appears in the Interface field at the top.

c. Enter the following information:

In the IP address, enter 192.168.5.2.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

Configure 1/0/22 as a routing port and assign an IP address to it.

a. Select Routing > IP > Advanced > IP Interface Configuration.

A screen similar to the following displays.

b. Scroll down and select the 1/0/22 check box.

Now 1/0/22 appears in the Interface field at the top.

c. Enter the following information:

In the IP Address field, enter 192.168.6.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

Enable RIP on the interface 1/0/21.

a. Select Routing > RIP > Advanced > Interface Configuration.

Managed Switches

Show Quick Links

Table of Contents