NETGEAR M4200 Software Administration Manual page 563
M4200 and m4300 series prosafe managed switches
Hide thumbs
Also See for M4200:
- Hardware installation manual (33 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
A screen similar to the following displays.
b. Scroll down and select the Port 1/0/9 check box.
Now 1/0/9 appears in the Port field at the top.
c.
Enter the following information:
•
In the IP Address field, enter 192.168.3.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
d. Click Apply.
4.
Configure 1/0/13 as a routing port and assign an IP address to it.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/13 check box.
Now 1/0/13 appears in the Port field at the top.
c. Enter the following information:
•
In the IP Address field, enter 192.168.1.2.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Routing Mode field, select Enable.
Managed Switches
PIM
563
Hide quick links:
Advertisement
Table of Contents
