Web Interface: Convert The Dynamic Address Learned From 1/0/1 To The Static Address; Create A Static Address; Cli: Create A Static Address - NETGEAR M4200 Software Administration Manual

Web Interface: Convert the Dynamic Address Learned from
1/0/1 to the Static Address
1. Select Security > Traffic Control > Port Security > Dynamic MAC Address.
A screen similar to the following displays.
2. Under Port Security Configuration, in the Port List field, select 1/0/1.
3. Select the Convert Dynamic Address to Static check box.
4. Click Apply to save the settings.

Create a Static Address

The example is shown as CLI commands and as a web interface procedure.

CLI: Create a Static Address

(Netgear Switch) (Interface 1/0/1)#port-security mac-address 00:13:00:01:02:03
Managed Switches
Security Management
308