Web Interface: Configure Diffserv For Ipv6 - NETGEAR M4200 Software Administration Manual

4. Associate the previously created class classicmpv6.
(Netgear Switch) (Config-policy-map)# class classicmpv6
5. Set the attribute as assign queue 6.
(Netgear Switch) (Config-policy-classmap)# assign-queue 6
(Netgear Switch) (Config-policy-map)# exit
6. Attach the policy policy_icmpv6 to interfaces 1/0/1,1/0/2 and 1/0/3:
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# service-policy in policyicmpv6
(Netgear Switch) (Interface 1/0/1)# exit
(Netgear Switch) (Config)# interface 1/0/2
(Netgear Switch) (Interface 1/0/2)# service-policy in policyicmpv6
(Netgear Switch) (Interface 1/0/2)# exit
(Netgear Switch) (Config)# interface 1/0/3
(Netgear Switch) (Interface 1/0/3)# service-policy in policyicmpv6
(Netgear Switch) (Interface 1/0/3)# exit

Web Interface: Configure DiffServ for IPv6

1. Create the IPv6 class classicmpv6.
a. Select QoS > DiffServ > Advanced > IPv6 Class Configuration.
A screen similar to the following displays.
b. In the Class Name field, enter classicmpv6.
c. In the Class Type list, select All.
Managed Switches
DiffServ
262