NETGEAR M4200 Software Administration Manual page 127

c. Click Apply to save the settings.
5. Enable OSPF on port 2/0/11.
a. Select Routing > OSPF > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/11 check box.
Now 2/0/11 appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.0.
• In the OSPF Admin Mode field, select Enable.
c. Click Apply to save the settings.
6. Enable OSPF on port 2/0/19.
a. Select Routing > OSPF > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/19 check box.
2/0/19 now appears in the Interface field at the top.
Managed Switches
OSPF
127