Accounting; Cli: Configure Telnet Command Accounting By A Tacacs+ Server - NETGEAR M4200 Software Administration Manual

Accounting

The accounting process records what a user does or has done on the switch. You can
configure a TACACS+ accounting server or RADIUS accounting server to account for the
following actions:
• Account for services that were used, such as in a billing environment. You can use this
type of accounting as an auditing tool for security services.
• Account when a user logs in and logs out of a user EXEC session.
CLI: Configure Telnet Command Accounting by a TACACS+
Server
Note: TACACS+ accounting supports both user EXEC command
authorization and privileged EXEC command authorization.
(Netgear Switch)(Config)#tacacs-server host 10.100.5.13
(Netgear Switch)(Tacacs)#key 12345678
(Netgear Switch)(Tacacs)#exit
(Netgear Switch)(Config)#
(Netgear Switch)(Config)#aaa accounting commands default stop-only tacacs
(Netgear Switch)(Config)#line telnet
(Netgear Switch)(Config-telnet)#accounting commands default
(Netgear Switch)(Config-telnet)#exit
(Netgear Switch)#show accounting methods
AcctType MethodName
--------- ---------------- ------------- --------- ---------
Exec dfltExecList
Commands dfltCmdList
Line EXEC Method List
--------- -------------------- --------------------
Console none
Telnet dfltExecList
SSH none
HTTPS none
HTTP none
Managed Switches
MethodType Method1
start-stop radius
stop-only tacacs
Command Method List
none
dfltCmdList
none
none
none
Security Management
364
Method2