Enable Iscsi Awareness With Vlan Priority Tag; Cli: Enable Iscsi Awareness With Vlan Priority Tag; Web Interface: Enable Iscsi Awareness With Vlan Priority Tag - NETGEAR M4200 Software Administration Manual

M4200 and m4300 series prosafe managed switches

Hide thumbs Also See for M4200:

Table of Contents

Enable iSCSI Awareness with VLAN Priority Tag

The example is shown as CLI commands and as web interface procedure.

Use the following commands to enable iSCSI awareness, select VPT, and set VLAN number

and aging time.

(Netgear Switch) #config

(Netgear Switch) (Config) #iscsi enable

(Netgear Switch) (Config) #iscsi cos vpt 5

(Netgear Switch) (Config) #iscsi aging time 10

(Netgear Switch) (Config) #exit

Enable iSCSI awareness, select VPT, and set VLAN number and aging time.

a. Select Switching > iSCSI > Basic.

A screen similar to the following displays.

b. Enter the following information:

Next to iSCSI Status, select the Enable radio button.

Next to QoS Profile, select the VLAN Priority Tag radio button.

From the VLAN Priority Tag menu, select 5 (the default value).

Next to Remark, select the Enable radio button (the default value).

In the iSCSI Aging Time field, enter 10 (the default value).

c. Click Apply to save the settings.

Managed Switches

Show Quick Links

Table of Contents