Web Interface: Show Logging - NETGEAR M4200 Software Administration Manual

Web Interface: Show Logging

1. Configure the syslog.
a. From the main menu, select Monitoring > Logs > Sys Log Configuration.
A screen similar to the following displays.
b. In the Syslog Configuration, next to the Admin Status, select the Enable radio
button.
c. Click Apply.
2. Configure the command log.
a. Select Monitoring > Logs > Command Log.
A screen similar to the following displays.
b. Under Command Log, for Admin Status, select the Disable radio button.
c. Click Apply.
3. Configure the console log.
a. Select Monitoring > Logs > Console Log.
A screen similar to the following displays.
Managed Switches
Syslog
424