NETGEAR M4200 Software Administration Manual page 534
M4200 and m4300 series prosafe managed switches
Hide thumbs
Also See for M4200:
- Hardware installation manual (33 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
•
In the Next Hop IPv6 Address Type field, select Global.
•
In the Next Hop IPv6 Address field, enter 2002:c301:502::1.
c. Click Add.
8.
Create a static route for subnet 195.1.4.0/24.
a. Select Routing > Routing Table > Advanced > Route Configuration.
A screen similar to the following displays.
b. Configure the following route settings:
•
In the Network Address field, enter 195.1.4.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop Address field, enter 195.1.3.1.
c. Click Add.
9.
Create a static route for 195.1.5.0/24.
a. Select Routing > Routing Table > Advanced > Route Configuration.
A screen similar to the following displays.
b. Configure the following route settings:
•
In the Network Address field, enter 195.1.5.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop Address field, enter 195.1.3.1.
c. Click Add.
Managed Switches
Tunnels for IPv6
534
Hide quick links:
Advertisement
Table of Contents
